Multisolar accelerates the expansion of its offering for the Argentine photovoltaic market , combining new product additions with support and training tools for integrators, developers, EPC contractors and installers.
Between September and October, the company added higher power modules, new alternatives for energy storage, solar pumping, structures adapted to current panel formats, and monitoring and management solutions.
In parallel, it reinforced its technical training agenda with two webinars scheduled for late October and early November, focusing on Growatt industrial inverters and Handuro solar pumps.
The goal is to support projects of different scales not only with equipment, but also with local stock, technical advice, financing, after-sales service, training and warranty support .
September: more storage, modules and solar pumping
One of the main developments of the month was the incorporation of the Deye BOS-A-PACK7.68 high-voltage battery system, developed for projects that require modularity and expansion capacity.
Each module has 7.68 kWh and the system can scale up to approximately 2.5 MWh , depending on the configuration used.
The solution supports a maximum current of 160 A, has a 10-year warranty and is compatible with Deye HV hybrid inverters.
In photovoltaic modules, Multisolar incorporated the Jinko Solar 66HL5-BDV of 725 W , with N-Type TOPCon technology, double glass construction and an efficiency of up to 23.34% .
The model operates with a maximum system voltage of 1500 VDC and adds bifacial technology to also take advantage of the radiation incident on the back face.
In addition, it has a 30-year linear power warranty .
The range was also expanded with the Amerisolar All Black 580W , model AS-7M144N-HC-580W, based on N-Type TOPCon monocrystalline cells.
It achieves an efficiency of up to 22.44% and is especially aimed at projects where, in addition to performance, the aesthetic integration of the modules is important in the design.
In solar pumping, Multisolar added new Handuro equipment of 750 W, 1500 W, 2200 W and 3000 W , with alternatives for different needs of flow, height and power.
The new models were also incorporated into the company's pump selection spreadsheet to facilitate sizing according to the characteristics of each project.
These new features were complemented by Chiko Clips for water drainage , designed to promote drainage from the lower edge of the panels and reduce the accumulation of mud, dust and sediment.
Growatt enters the training agenda
The portfolio expansion will be accompanied by new training opportunities.
On October 29th at 7:00 PM , Multisolar will hold the webinar “Growatt Industrial On Grid Inverters: MAX Series, configuration and commissioning” .
The training will be led by Anddy Pérez, Head of After-Sales at Multisolar , and will cover the configuration of the MAX Series, commissioning with and without injection limitations, monitoring, remote configurations, and identification of common faults.
The meeting will be held online via Microsoft Teams.
At the end, participants will be able to take a test and the winner will receive a Growatt Infinity 1300 Pro portable power station .
Handuro: second technical webinar in November
The cycle will continue on November 5 at 5:00 PM with a specific training session on Handuro solar pumps.
The webinar will be led by Aaron Cosentino Pisani, Support Engineer , and will cover the features of the equipment, controllers, configuration parameters, sizing, selection, and troubleshooting of common problems.
The activity will also be online via Microsoft Teams and will be geared towards professionals, installers and integrators interested in incorporating solar pumping solutions.
In this case, the three best results of the final test will receive a Mate Handuro Kit.
October: Multifix, Huawei and new Deye solutions
During October, Multisolar further expanded its offering with new Multifix structures, Huawei solutions for commercial and industrial storage, and Deye accessories for energy monitoring and management.
Among the structural innovations is the Carport Multifix V1 , designed for photovoltaic installations on parking lots.
The solution features validated CIRSOC compliance, ZAM steel manufacturing with self-healing capability, and a configuration of 15 panels of 630 W for every two vehicles .
The Multifix2x9V2 structure was also incorporated, designed specifically for modules 1303 mm wide and power ratings of approximately 710 W to 735 W.
It allows the installation of 18 panels in a 2x9 configuration , for modules of 2384 x 1303 x 33 mm, and also has validated CIRSOC compliance.
In storage, one of the most relevant additions is the Huawei SMARTMGC5000B06GL , a microgrid controller for commercial and industrial BESS systems.
It is compatible with the LUNA2000-215-2S1 and LUNA2000-241-2S1 solutions, available in stock at Multisolar.
Compared to the SmartLogger3000C01, the new solution simplifies the system architecture: it does not require a network protection relay, synchronization relay or Smart Meter, as it supports direct connection of current transformers.
Furthermore, it allows you to configure microgrids with up to 20 batteries and 30 inverters , integrate generator sets and perform transfers between grid and batteries in times of between 20 and 150 milliseconds , depending on the number of connected devices.
Multisolar is also inviting integrators, developers, and installers with Huawei LUNA2000-215 or LUNA2000-241 projects to register them to access technical and commercial support, including evaluation of specific conditions and marketing support.
More monitoring and management with Deye
The October portfolio is completed with the new Deye SUN-SMART-CT01 and SUN-SMART-TX01 , designed to facilitate measurement and communication in photovoltaic systems using LoRa wireless technology.
The SUN-SMART-CT01 allows bidirectional measurement of consumption and generation, works in single-phase and three-phase systems and incorporates Zero Export functions.
The SUN-SMART-TX01 complements that solution by providing wireless communication with compatible Deye hybrid inverters and offers a range of up to 200 meters .
The combination of both systems aims to reduce cabling, simplify installation, and improve energy flow monitoring.
With these additions and new training activities, Multisolar seeks to expand its offering for a market where higher power modules, C&I storage, specialized structures and smart energy management tools are beginning to gain ground.
The strategy aims to integrate equipment, technical support and training into a single proposal to support solar and BESS projects of different scales in Argentina.
By Ailén Pedrotti
By Emilia Lardizabal
By Energía Estratégica
